Factory Defaults - TP-Link TL-WR700N User Manual

To upgrade the Router's firmware, follow these instructions below:
1. Download a
(http://www.tp-link.com).
2. Type the path and file name of the update file into the File field, or click the Browse... button
to locate the update file.
Click the Upgrade button.
3.
 Note:
1. New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Router rather than the
configuration, you can try to upgrade the firmware.
2. When you upgrade the Router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3. Do not turn off the Router or press the Reset button while the firmware is being upgraded,
otherwise, the Router may be damaged.
4. The Router will reboot after the upgrading has been finished.

4.14.4 Factory Defaults

This page allows you to restore the factory default settings for the router.
Click the Restore button to reset all configuration settings to their default values.
Default User Name - admin.

Default Password - admin.

Default IP Address - 192.168.0.254.

Default Subnet Mask - 255.255.255.0.


Note:
Any settings you have saved will be lost when the default settings are restored.
TL-WR700N
more recent firmware
Figure 4-61 Restore Factory Default
150Mbps Wireless N Mini Pocket Router
upgrade file from
- 73 -
the TP-LINK website