TP-Link TL-WR700N User Manual page 41

MTU Size - The default MTU size is "1480" bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name

should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to

the Router during login, please click "Use IP address specified by ISP" check box and
enter the IP address provided by your ISP in dotted-decimal notation.
Detect Online Interval - The Router will detect Access Concentrator online at every

interval. The default value is "0". You can input the value between "0" and "120". The
value "0" means no detect.
Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS

addresses to the Router during login, please click "Use the following DNS servers"
check box and enter the IP address in dotted-decimal notation of your ISP's primary
DNS server. If a secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides L2TP connection, please select L2TP/Russia L2TP option. Then you
should enter the following parameters (Figure 4-10):
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 4-9 PPPoE Advanced Settings
- 29 -