Dhcp; Dhcp Settings - TP-Link TL-WR700N User Manual

MAC Address - The connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - Packets received by the station

Sent Packets - Packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

8.7 DHCP

Figure 8-14 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 8-14): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.

8.7.1 DHCP Settings

Selecting DHCP → DHCP Settings will enable you to set up the Range Extender as a DHCP
(Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the
PCs that are connected to the system on the LAN. The DHCP Server can be configured on the
page (shown as Figure 8-15), only when you've set the Network LAN type as Static IP in Figure 8-6.
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 8-13 Wireless Statistics
- 142 -
STA-AUTH /