Client Mode - TP-Link TL-WR700N User Manual

5. The Finish page is shown as Figure 3-16. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.

3.1.4 Client Mode

When you choose Client on Working Mode page in Figure 3-2 , take the following steps:
1. Wait a few minutes when the device is detecting the surrounding wireless networks.
2. Choose the wireless network you would like to extend from the list available, and then click
Next.
3. Input the wireless password of the wireless network you've chosen, and then click Next.
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 3-16
Figure 3-17
Figure 3-18
- 17 -