TP-Link TL-WR700N User Manual page 21


Note:
The Device is equipped with Smart IP function, which would help to enable its built-in DHCP
server when it's required. For your convenience, please configure your PC or other clients to
"Obtain an IP address automatically". If you need any instructions as how to do this, please refer
to Appendix B: "Configuring the
Figure 2-5 Hardware Installation of the TL-WR700N in AP Mode
1. Connect the LAN port of TL-WR700N to the wired network port with an Ethernet cable.
2. Plug the power plug of TL-WR700N in electrical wall socket.
3. Power on the PC(s) and notebook(s).
TL-WR700N 150Mbps Wireless N Mini Pocket Router
PC".
- 9 -