Lenovo ThinkServer 1045 Installation And User Manual page 59
Hide thumbs
Also See for ThinkServer 1045:
- Hardware maintenance manual (166 pages) ,
- Benutzerhandbuch (156 pages) ,
- Manual d'utilisation (152 pages)
Table of Contents
Advertisement
Figure 41. Installing the RAID controller into the PCI card slot on the riser card
8. Install the riser card with the RAID controller into an appropriate PCI card slot on the system board.
9. Connect the other end of the two 400 mm (15.75 inches) mini SAS signal cables to the backplane of
your server.
Figure 42. Mini SAS signal connectors on the backplane
a. For one mini SAS signal cable, connect the other end to the mini SAS signal connector
backplane.
b. For the other SAS signal cable, connect the other end to the mini SAS signal connector
backplane.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 68.
.
Chapter 5
Installing, removing, or replacing hardware
2
on the
1
on the
49
Advertisement
Table of Contents
