Raid Controllers - Lenovo ThinkServer 1045 Installation And User Manual

• Not be a common word or a common name
• Be significantly different from your previous passwords
Setting, changing, or deleting a password
This section provides instructions on how to set, change, or delete a password.
To set, change, or delete a password, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 72.
2. From the Setup Utility program main menu, select Security ➙ Change Supervisor Password or
Change User Password.
3. Follow the instructions on the screen to set, change, or delete a password.
Note: A password can be any combination of up to 6 (1 to 6) alphabetic and numeric characters. For
more information, see "Password considerations" on page 79.

RAID controllers

The following table lists the various utilities available to configure RAID controllers before an operating
system is installed.
Table 26. RAID utilities
RAID utilities
EasyStartup • For use with all
• Automatically detects
• Configures one disk array
• Created a RAID response file
LSI IR-RAID Utility Onboard 1068E SAS RAID
controller
LSI MegaRAID ThinkServer 8708ELP SAS RAID
WebBIOS adapter, ThinkServer 8708EM2
Configuration Utility RAID Adapter, or ThinkServer
RAID 700 Adapter (9260-8i)
80
ThinkServer Installation and User Guide
Description
factory-supported RAID
controllers
hardware and lists
all supported RAID
configurations
per controller using all drives
currently attached to the
controller
that can be used to configure
RAID controllers on similarly
configured Lenovo servers.
Location Where to find more information
ThinkServer "Using the ThinkServer
EasyStartup DVD EasyStartup program" on
page 81
Press Ctrl+C to start "Onboard 1068E SAS RAID
controller Configuration Utility
program" on page 83
Press Ctrl+H to start Refer to the MegaRAID SAS
Software User Guide on the
documentation DVD that came
with you server. And you can
find and install the MegaCLI
program and the MegaRAID
Storage Manager program in the
ThinkServer EasyStartup DVD
that came with your server. Insert
the DVD into the optical drive
and the files are in the \Tools And
Utilities directory.