Idle Speed Adjusting Screw; Shift Lever; Kick Starter; Foot Brake Lever - KTM 350 EXC-F EU Owner's Manual

CONTROLS

Idle speed adjusting screw

5.35

Shift lever

5.36

Kick starter

5.37

Foot brake lever

5.38
Idle speed adjusting screw
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
RPM increase activated – Idle speed adjusting screw is pulled out all the way.
•
RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
•
401342-10
Shift lever is mounted on the left side of the engine.

101307-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
101308-10
The kick starter
The engine can be started with either the kick starter or the electric starter.
The upper part of the kick starter can be swung out.
Info
Before riding, swing the upper part of the kick starter inwards towards the
engine.
101309-10
Foot brake lever
The foot brake lever is used to activate the rear brake.
101310-10
is located on the throttle valve body at the top left.

is fitted on the right of the engine.

is located in front of the right footrest.

21