Table of Contents
Advertisement
Text-string Settings
You can specify numerical value for rotation, slanting, character pitch, and so on in a dialog box.
At the toolbar, click
The character cursor appears in the text string.
Alternatively, at the toolbar click
Points appear around the text string.
From the [Format] menu, select [Properties].
The [Text string Properties] dialog box appears.
When you have finished making the settings, click [OK].
Filling a Text String
If the Fill setting is not made, only the outlines of characters are engraved.
When the Fill setting is made, the interiors of characters are all engraved by flat-dragging.
At the toolbar, click
The character cursor appears in the text string.
Alternatively, at the toolbar click
Points appear around the text string.
At the toolbar, click
Alternatively, from the [Shape] menu, select [Fill].
The [Fill Setup] dialog box appears.
You can specify colors and vary
the engraving depth for each color.
The spacing of these
lines is the pitch.
, then click the text string.
, then click the text string.
, then click the text string.
, then click the text string.
.
When you click this to select the check box, flat-drag engraving
of the interiors of the character outlines is performed, then the
contour lines of the characters are engraved.
Enlarged area
Click
on the toolbar to make the pointer change to
the location where you want to zoom in. Right-click to zoom out.
Changing the settings for any of the
items updates the settings for the text
shown in the preview field.
You can change the character boldness.
Click [Fill] to select the check box.
[Pitch] is the engraving spacing of the cutter.
When you're using the included cutter, set
this to [0.1].
When you have finished making the
settings, click [OK].
Pitch lines appear in the characters. The cut-
ter moves along these lines as it engraves.
3 Creating a Nameplate (Engraving Mode)
, then click
23
Hide quick links:
Advertisement
Table of Contents
