Overriding A Busy Signal - Nortel 1230 User Manual

• "Using Enhanced Override" on page 141

Overriding a busy signal

Use the Override feature to override a busy signal and interrupt another
call.
EnhOvr
or
(Goodbye)
Using Forced Camp-on feature
Use the Forced Camp-on feature to automatically call a busy telephone
(internal or external) immediately after the telephone disconnects from
the current call.
Operating your IP Phone 1230
1. Dial a number.
You receive a busy tone.
2. Press the EnhOvr
Enter the Override
The person in the targeted call receives
a tone for approximately 1 second. After
the Override feature connects you to the
call, a short tone repeats every 16
seconds.
3. To terminate the call, press the
Goodbye key.
key.
or
FFC.
139