FLY SL400 User Manual page 52

during which all activation options of other profiles will be prohibited
and temporarily hidden.
General Apply to general environment.
Meeting Apply to Meeting, need preset (for example: Set
vibrator to "On").
Outdoor Apply to outdoor environment, need preset (for
example, set a higher ringtone volume).
Indoor Apply to Indoor environment, need preset
Earphone Apply to earphone user, need preset (for example:
Lower down ringtone volume).
Press Up/Down button, scroll to desired profile, and press
"Option":
Activate Activate selected profile.
Customise Make personalized setting to profile. Select
settings that needs to change and make the change, which includes:
Tone Setup, volume, Alert Type, Ring Type, Connect Notice, Extra
Tone, Answer Mode and LCD backlight. Refer to detailed instruction in
"Setting".
Silent Mode
In standby mode, long press # to enter silent
mode, and open vibrator at the same time; long press # again to quit
silent mode, and restore to previous setting.
NOTE: All the 5 modes other than silent mode have factory
setting, and the phone is activated with general mode by default.
Setting
Tone Setup Select one ringtone from a choice of ringtones, and use it
in different places. For Incoming Call and Alarm, you can select system
ringtone or user's personal ringtone; for Power on, Power off, Cover
Open, Cover Close and Message Tone, you can also select preset
tone or no ringtone through silent function; for Key Tone, you can
select "Silent", "Click" and "Tone".
Volume Set the volume of Ringtone and Key Tone. In Volume
Adjustment screen, adjust volume through Up/Down button and Right
Side-button.
Alert Type Select one mode from "Ring", "Vibration Only",
"Vibra and ring", "Vibra then Ring", and use it as current prompt tone.
Ring type Select one from "Single", "Repeat" and
"Ascending" as current ringtone type.
52