Nitsuko ONYX Feature Handbook page 76

7R7UDQVIHUDFDOOWRD
FRYHUHGH[WHQVLRQ
7RSLFNXSDFDOOULQJLQJD
FRYHUHGH[WHQVLRQ
8VHU3URJUDPPDEOH
7RSURJUDPULQJLQJIRU\RXU
&DOO&RYHUDJHNH\V
Press Call Coverage key.
1.
If you hear two beeps, announce call.
2.
OR
If you hear ringing, wait for called party to
answer before announcing call.
OR
Hang up to Transfer the call unannounced.
OR
If you hear ring/busy, dial 1 to send Off-
Hook Signaling. Refer to the Off-Hook Sig-
naling feature.
Press flashing Call Coverage key.
1.
If your system is a VS, use Ring Assignment
and Delayed Ring Assignment in
)HDWXUH
User-Programmable Features (page 86)
instead of the procedure below. To change a
Call Coverage Key extension assignment, use
DSS programming. See DSS in
User-Programmable Features (page 86).
(The Call Coverage key rings for calls to the
covered extension. If you are an attendant,
you cannot use this option.)
Press PGM#.
1.
Press Call Coverage key.
2.
-Dial D for delayed ringing.
-Dial R for immediate ringing.
-Dial L for no ringing (lamp only).
Press HF to hang up.
3.
Station Call Coverage
69