Safety Symbols - Craftsman 82005 Owner's Manual

SAFETY SYMBOLS

This symbol adjacent to another symbol,
terminal or operating device indicates that
the operator must refer to an explanation in
the Operating Instructions to avoid personal
injury or damage to the meter.
This WARNING symbol indicates a
WARNING
potentially hazardous situation, which if not
avoided, could result in death or serious
injury.
This CAUTION symbol indicates a
CAUTION
potentially hazardous situation, which if not
avoided, may result in damage to the meter.
This symbol advises the user that the
MAX
terminal(s) so marked must not be
1000V
connected to a circuit point at which the
voltage, with respect to earth ground,
exceeds (in this case) 1000 VAC or VDC.
This symbol adjacent to one or more
terminals identifies them as being
associated with ranges that may, in normal
use, be subjected to particularly hazardous
voltages. For maximum safety, the meter
and its test leads should not be handled
when these terminals are energized.
This symbol indicates that a device is
protected throughout by double insulation
or reinforced insulation.
4