Locking The Keypad; Using Alarms; Setting The Alarm - Toshiba IP4100 SIP DECT User Manual

Locking the Keypad

While the keys are locked, you will not be able to use any handset functions that require
a key press, including making and receiving calls. You can still dial emergency numbers
(999) while the keys are locked.
1) From the main menu screen, select the Settings icon.
2) On the Settings screen, select Security, then select Automatic keylock.
3) Select the amount of time (from 15 seconds to 5 minutes) you want the handset to wait
before it locks the keypad, or select Off to have the handset never lock the keypad.
If the handset is idle for the amount of time you selected, it locks the keys. To unlock the
keypad, press Select followed by * . The keypad will remain unlocked until it remains inactive
for the amount time selected above.
Changing the PIN
You must enter the PIN to deregister the handset or reset it to factory default settings. Do
not change the PIN without notifying your system administrator!
1) From the main menu screen, select the Settings icon.
2) On the Settings screen, select Security.
3) Select Change PIN. The handset prompts you to enter the current PIN.
4) Enter the four digits of the current PIN and press Select.. The handset prompts you to
enter the new PIN.
5) Enter the four digits you want to use as the new PIN and press Select..

Using Alarms

You can set two alarms on your handset: a one-time alarm and a recurring alarm.

Setting the Alarm

1) From the main menu screen, select the Alarms icon.
2) For a one-time alarm, select Alarm; for a repeating alarm, select recurrent alarm.
3) Set the time you want the alarm to sound.

Enter the time using the twelve-key dial pad, or use Up and Down to select the time.

Select AM or PM.

Press Save
4) For a recurrent alarm, the handset prompts you to select the days of the week you want
the alarm to sound.

To select a day, highlight the day and press Mark; selected days show a check mark
beside the name.

To clear a day, highlight the day and press Unmark.

When you're finished, press OK.

Select Snooze time to change how long the handset waits when you snooze an
alarm. Choose from 1 minute through 10 minutes, in one-minute increments. (The
default is 10 minutes.)
when you're finished.