Toshiba IP4100 SIP DECT User Manual page 15

Alert tone
Vibrator
Key sound
Confirmation
sound
Coverage
warning
Charger
warning
Alarms Screen
Alarm
Recurrent alarm
Snooze time
Using Common Features
Making and Receiving Calls
To...
Make a call: Dial the number, then...
answer a call
reject a call
silence the ringer
Choose the tone this handset uses for alerts and notifications. As you
highlight each tone, press
tone you want, press Select.
Have the handset vibrate on an incoming call or a notification. Select one
of the following:
Off: The handset will not vibrate at all.
Vibrate then ring: The handset will vibrate first, then sound the tone or
melody on the second ring.
Vibrate only: The handset will only vibrate, not ring.
Vibrate and ring: The handset will vibrate and ring at the same time.
Have the keypad sound a tone when you press a key. Choose one of two
sounds (Click or Tone) or select Silent to turn off the keypad tone off. The
tone will be activated after you press Select or OK.
Press On if you want the handset to sound a tone each time you change
a setting. Press Off to disable this tone.
Press On if you want the handset to sound a warning when you
approach the edge of the base's range. Press
Press On if you want the handset to sound a warning when the battery is
getting low. Press Off
Set a one-time alarm on this handset. Enter the time you want the
alarm to sound and press Save.
Set an alarm to sound on specific days of the week. Enter the time
you want the alarm to sound and press Save. The handset then
prompts you to select which days you want the alarm to sound.
Select the amount of time alarms remain snoozed before ringing
again. Choose from 1 through 10 minutes, in one minute
increments; the default is 10 minutes.
Play to hear a sample. When you hear the
to disable this tone.
From the earpiece
Press Talk.
Press Talk.
Press Reject.
Press Silent.
Off to disable this tone.
From the
speakerphone
Press Speaker.
Press Speaker.