Set Pabx Mode; Set A Prefix Code - Alcatel Conference 1800 User Manual

2. Press
or
3. Press
or
Reset to default?.
4. Press to confirm. You hear a confirmation tone.

7.10. Set PABX Mode

If the Alcatel Conference 1800 unit is connected to a PABX system, you
should set PABX mode on.
1. In idle mode, press
2. Press
or
3. Press
or
4. Press
or
a confirmation tone.
Remarks:
1. when you connect it behind PABX system, you should need to turn Behind
PABX on, acoustic performance of Conference 1800 phone should be
better suited behind PABX system.
2. When you connect it behind public telephone network or through
broadband operator, you may need to turn Behind PABX off.
7.11. Set a Prefix Code
Normally, when you set Behind PABX on, you can set a prefix (e.g. 9) before
each number is dialed externally from the call list.
1. In idle mode, press
2. Press
or
3. Press
or
4. Enter the number you want (maximum 1 digit), then press
5. If the number is added already, press
then input new digit, press
to select Settings.
to select Reset, then press
.
to select Settings.
to select Behind PABX, then press
to select Yes or No, then press
.
to select Settings.
to select Prefix Code, then press
to confirm. You hear a confirmation tone.
. The screen displays
to delete the original number,
23
.
to confirm. You hear
.
.