Table of Contents
Advertisement
10. SAFETY
In the event of an electrical hazard, the mains adapter acts as 230V power
isolating device. It should therefore, as a precaution, be installed close to the
appliance and be easily accessible. To disconnect the device from the primary
power source, the mains adapter must be removed from the 230V AC/50 Hz
socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure,
the whole conference unit will not work. You will then be unable to make or
receive calls in the event of an emergency.
This is why we recommend that you also keep a conventional telephone – one
that doesn't require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing in the
vicinity of the leak.
It is recommended that you avoid using this device during electrical storms.
Do not attempt to open the batteries, as they contain chemical substances.
In the event of leakage, avoid contact with the skin, eyes, nose and mouth.
In the event of contact, rinse the affected part for about twenty minutes with
running water and seek urgent medical attention.
Clean the product with absorbent paper or a dry cloth and contact your
reseller for replacement batteries.
ATLINKS hereby declares that the following models conform to the essential
requirements and other applicable provisions of European directive 1999/5/
EC.
Alcatel Conference 1800
27
Advertisement
Table of Contents
