Table of Contents
Advertisement
8.
TECHNICAL SPECIFICATIONS
Indoor Range (wireless
microphone unit)
Battery Life (Wireless
microphone unit)
(average values)
Number of Wireless
microphone units
connected to the
base unit
Electrical Connection/
Base
Mains Adaptor
Telephone
Connection
Batteries (in each
wireless microphone
unit)
Operating
Temperature
* Values may vary according to environment.
** Depending on initial battery charge.
Up to 30 metres*
5 hours talk time**
70 hours standby**
Up to 4
Base main adaptor (interface module):
Model No.: S018AGP0900200
Input: 100-240 V/50-60 Hz/500mA Output:
9VDC/2A
Only use the adaptor supplied with telephone.
Single-phase AC, excluding IT install defined by
the EN60950 standard.
Caution: The network voltage is classified as
hazard by the criteria of this standard.
Appliance designed for connection to a TNV3 class
(telecommunications network voltage) analogue
telephone line as defined by the EN60950
standard.
Battery pack – 2.4 V – 240mAh (Li-ion Polymer)
Only use the batteries supplied with the telephone.
Use any other type of battery presents a risk of
explosion. Used batteries must be disposed of in
compliance with current environmental protection
regulations.
From 5°C to 40°C
24
Advertisement
Table of Contents
