Environment Concerns - Zanussi ZWI 71201 WA User Manual

Where the appliance has been raised by
mounting onto a wooden base provided by
the installer. The material used to construct
the base should have anon slip surface, be
water repellent and if possible be one solid
piece.
If it is not possible to use one solid piece, due
to the additional height required, ensure that
any additional strips of timber are glued and
screwed to the underside of the base (see
Fig. F).
Graphic G
95
50
Top view
Drill four fixing holes see Fig. G
Position the base into the recess with its front
edge as far forward as the adjoining plinth line
will allow.
The reason for placing the base in this
position is to allow a small strip of
beading to be fitted in front of the appli-
ance feet.

Environment concerns

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it.
Help protect the environment and human health
and to recycle waste of electrical and electronic
appliances. Do not dispose appliances marked
www.zanussi.com
600-605
Front edge
Graphic H
490
Fix the base firmly to the floor using four ap-
propriate countersunk screws (see Fig. H).
490
With the appliance installed adjust all four feet
ensuring the machine is stable, and a clear-
ance of approximately 5 mm is left between
the top of the machine and the underside of
the worktop.
A final check for stability should be carried out
with the machine on spin with a load, this will
identify the need for any further fine adjust-
ment to the feet.
A strip of beading approximately 605 mm W, x
5 mm H, x 25 mm D must be screwed down
into the base directly in front of the machine's
feet, this will provide additional security.
If required an additional door magnet, part
number 1242394-00/3 and disc, part number
1242393-00/5 are available from spare parts.
. Put with the symbol with the household waste.
Return the product to your local recycling facility
or contact your municipal office.
Packaging materials
The materials marked with the symbol
cyclable.
Hardwood strip
5 mm x 25 mm
5 x 25 x 605
600-605
are re-
27