Kodak ScanMate i1150 Setup Manual page 19

18
Post-scan rotation — allows you to select any rotation to be applied to
the electronic image after it has been scanned.
• (none)
• Automatic — the scanner will analyze each document to determine
how it was fed and will rotate the image to the proper orientation.
• Automatic - default to 90: the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 90 degrees.
• Automatic - default to 180: the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 180 degrees.
• Automatic - default to 270: the scanner will analyze the content of
each document to determine how it was fed and will rotate the image
to the proper orientation. If the scanner cannot determine how the
document was fed, it will rotate the image 270 degrees.
• 90, 180, 270 degrees — the amount of rotation that will be
performed.
The following example shows how these settings effect a document
that was fed landscape:
Landscape Feed
Orientation
NOTE: This option is not applied to the preview image.
90 180
degrees degrees
270
degrees
A-61818 April 2014