Kodak ScanMate i1150 Setup Manual page 25

Scanning setup guide for twain applications
Hide thumbs Also See for ScanMate i1150:
Table of Contents

Advertisement

24
• All sides match: when turned on, an equal amount will be filled in on
all sides. This option is only available for Black and White.
• Top: determines how much of the top edge will be filled in.
• Left/Right: the option on the left will determine how much of the left
edge will be filled in and the option on the right will determine how
much of the right edge will be filled in.
• Bottom: determines how much of the bottom edge will be filled in.
NOTES:
• The Top, Left/Right and Bottom options are not available when All
sides match is turned on.
• When using Image Edge Fill, be careful not to enter a value too
large as it could fill in image data that you want to keep.
• This option is not applied to the preview image.
Streak Filter — allows you to configure the scanner to filter vertical
streaks from your images. Streaks are lines which may appear on an
image and are not part of the original document. Streaks may be
caused by contaminants on your documents (e.g., dirt, dust, or frayed
edges) or by not following the recommended cleaning procedures for
your scanner.
• On: turns streak filter on.
• Aggressiveness: allows you to adjust the extent at which the streaks
are filtered. The values range from -2 to 2. The default is 0.
Color Dropout — used to eliminate a form's background so that only
the entered data is included in the electronic image (e.g., remove the
form's lines and boxes). For black and white images, these settings
effect the grayscale version of the document which the scanner
analyzes to produce that electronic image.
Color
• (none)
• Multiple: drops colors other than dark shades (e.g., black or dark
blue ink)
• Predominant: drops the predominant color
• Blue
• Green
• Red
- Aggressiveness: allows you to adjust the extent at which the colors
are dropped. The values range from -10 to 10. The default is 0. This
option is only available when Color is set to Multiple or
Predominant.
NOTE: The Color Dropout options are only available when the Scan as
selection is Black and White.
A-61818 April 2014

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scanmate i1180I24x0I26x0I28x0

Table of Contents