Kodak Ngenuity 9000 Series User Manual page 46

A-61662 April 2010
Always remove the rollers from the scanner for cleaning to ensure best
results.
1. Turn off the scanner and open the transport cover.
2. Remove the pick roller by rotating the blue pick roller release lever
up, push the pick roller to the right and rotate it out of position.
3. Using the cleaning wipe, scrub the roller tires in a side-to-side
motion, Rotate the roller to clean the entire surface.
4. Re-install the clean pick roller.
• With the pick roller positioned so the dots are facing the left side,
slide the roller onto the right pick roller shaft.
• Holding on to the roller, rotate the pick roller shaft down and slide
the roller all the way to the left. The right side of the roller should
be clear of the pick roller release lever.
• Bring the pick roller release lever down and snap it into place.
5-5