Omron GQ-CRM21 Operation Manual page 72

• Analog Input Units
Only the input analog values are selected as I/O data. The data is allocated four words (eight bytes)
in the remote input register (RWr) area of the CC-Link Master Unit.
4
• Analog Output Units
Analog Output Units have one type of output data. The output data is allocated by default, so no set-
tings are required.
Two words (four bytes) of output data are allocated. The data is handled as two's complement data.
4 - 17
15
Input analog value for input 0
Input analog value for input 1
Input analog value for input 2
Input analog value for input 3
15
Output analog value for output 0
Output analog value for output 1
8 7
8 7
CompoNet Gateway Unit for CC-Link Operation Manual
0
0