Advertisement
3-6 Wiring the CC-Link Network
The Gateway Unit is treated as a remote device station in the CC-Link network. To connect the
Gateway Unit to the CC-Link network, refer to documentation for the CC-Link Master Unit and the CC-
Link Cable Wiring Manual.
3
3-6-1 Recommended Materials and Tools
After stripping the special CC-Link cable, attach ferrules.
Special CC-Link Cable (Version 1.10)
Refer to documentation for the CC-Link Master Unit and the CC-Link Cable Wiring Manual for
specifications and processing methods (including stripping methods) for the special CC-Link cable.
Ferrules
Use ferrules with insulative covers that conform to DIN 46228-4 standards. If non-complaint ferrules
are used, they may not be suitable for the terminal block on the Gateway Unit even if they have the
same shape.
(The wire size is a guideline only. Check compatibility in advance.)
Phoenix Contact
Ferrule Crimper
Phoenix Contact
Gateway Connector (Enclosed)
Mounting
screw
Wiring direction
*1 The enclosed Gateway Unit connector is made by Phoenix Contact.
Contact Information
Phoenix Contact
3 - 11
Manufacturer
AI0.75-10WH
Manufacturer
CRIMPFOX UD6
Insertion direction
Conductor cross-section
Model
0.5
Model
(Made by Phoenix Contact*1)
TFKC2.5/5-STF-5.08AU
CompoNet Gateway Unit for CC-Link Operation Manual
2
area (mm
)
Advertisement
Troubleshooting
