Advertisement
3-2 Installation Method
3-2-1 Mounting to a Control Panel
• When using a DIN Track to mount the Gateway Unit in the control panel, use End Plates (PFP-M,
sold separately) to secure the Gateway Unit on the DIN Track.
• When using screws to mount the Gateway Unit in the control panel, open mounting holes in the con-
trol panel and tighten the specified size of screws to a suitable torque to secure the Gateway Unit.
Use M4 screws and tighten them to between 0.6 and 0.98 N⋅m.
• There are no restrictions in the mounting orientation of the Gateway Unit.
CompoNet Gateway Unit for CC-Link Operation Manual
Wiring and Settings
3 - 4
3
Advertisement
Troubleshooting
