5.4.5 Site Survey
This page is used to view or configure other APs near yours.
To connect with other AP by site survey, you need to configure the WNAP-6305 as "AP Client" mode in
the Basic Wireless Settings page as following.
Step 1.
Go to "Wireless Settings-> Basic", select the Wireless Moe to "AP Client",
Step 2.
Go to "Wireless Settings->Site Survey" to scan the AP. Select the AP that you choose to
connect, and then click "Next".
Figure 5-29 Basic Wireless Settings
- 60 -
User's Manual of WNAP-6305