General Working Instructions - Partner K3000 EL Operator's Manual

• Do not use a rolled up extension cord
• The machine should be connected to an earthed outlet
socket.
• Check that the mains voltage corresponds with that stated
on the rating plate on the machine.
• Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
• Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator's manual.
Transport and storage
Do not store or transport the power cutter with the cutting
blade fitted.
Store the power cutter in a lockable area so that it is out of
reach of children and unauthorised persons.
All blades should be removed from the cutter after use and
stored carefully. Store cutting blades in dry, frost free
conditions.
Special care should be taken with abrasive discs. Abrasive
discs must be stored on a flat, level surface. If blades are
supplied with a backing pad then a spacer should be used to
keep them flat.
If an abrasive disc is stored in humid conditions, this can
cause imbalance resulting in injury.
Inspect new blades for transport or storage damage.

General working instructions

WARNING! This section describes basic
!
safety directions for using a power cutter.
This information is never a substitute for
professional skills and experience. If you get
into a situation where you feel unsafe, stop
and seek expert advice. Contact your dealer,
service agent or an experienced power
cutter user. Do not attempt any task that you
feel unsure of!
Basic safety rules
• Look around you:
- To ensure that people, animals or other things cannot
affect your control of the machine.
- To make sure that none of the above come into contact
with the cutting blade.
6 –
English
SAFETY INSTRUCTIONS
• Do not use the machine in bad weather, such as dense
fog, rain, strong wind, intense cold, etc. Working in bad
weather is tiring and can lead to dangerous conditions,
e.g. slippery surfaces.
• Never start to work with the power cutter before the
working area is clear and you have a firm foothold. Look
out for any obstacles with unexpected movement. Ensure
when cutting that no material can become loose and fall,
causing operating injury.Take great care when working on
sloping ground.
• Make sure clothing and parts of the body do not come into
contact with the cutting blade when the engine is started.
• Maintain a safe distance from the cutting blade when the
engine is running.
• The blade guard should always be fitted when the engine
is running.
• Ensure that the working area is sufficiently illuminated to
create a safe working environment.
• Do not move the power cutter with the blade rotating.
• Always ensure you have a safe and stable working
position
• Make sure that no pipes or electrical cables are routed in
the area to be cut.
• Ensure the cord is behind you when you start to use the
machine so that the cord will not be damaged.
• The machine should be connected to an earthed outlet
socket.
Cutting
WARNING! The safety distance for the power
!
cutter is 15 metre. You are responsible that
animals and onlookers are not in the
working area. Do not start to work with the
power cutter before the working area is clear
and you have a firm foothold.
General
• Start cutting with the engine at full throttle.
• Always hold the power cutter in a firm grip with both
hands. Hold the machine so that the thumb and fingers
grip around the handle.