Key To Symbols; Steps Before Using A New Power Cutter - Partner K3000 EL Operator's Manual

Key to symbols

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Rating plate
This product is in accordance
with applicable EC directives.
WARNING! Dust forms when cutting, which
can cause injuries if inhaled. Use an
approved breathing mask. Always provide
for good ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Inspection and/or maintenance should be
carried out with the motor switched off and
the plug disconnected.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
2 –
English
KEY TO SYMBOLS
Protective goggles or a visor must be worn.
Steps before using a new power
cutter.
• Please read the operator's manual carefully.
• Check the cutting blades mounting, see the chapter
"Assembly".
• Check that the cord and extension cord are intact and in
good condition.
• Do not use a rolled up extension cord
Let your Partner dealer check the power cutter and make
essential adjustments and repairs.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.