Technical Data; Cutting Equipment; Ec-Declaration Of Conformity - Partner K30 Operator's Manual

Technical data

Engine
3
Air consumption, m /min
Max. air pressure, bar
Air hose rec. dimension, inch/mm
Air intake dimension, inch/mm
Drive system, V-belt
Max. speed of output shaft, rpm
Weight
Power cutter without cutting blade, kg
Lubricant
Sound levels
Noise pressure level at the operators ear, max speed,
measured according to EN 792-7, ISO/DIS 11201, dB (A)
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Vibration levels
(see note 2)
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Handle vibrations are measured according to ISO 8662-4

Cutting equipment

Cutting blade Max. peripheral speed, m/s
12" (300 mm) 80
14" (350 mm) 100

EC-declaration of conformity

(Applies to Europe only)
Partner Industrial Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the power
cutter Partner K30, K40 dating from 2005 serial numbers and onwards (the year is clearly stated on the rating plate, followed by
the serial number), complies with the requirements of the COUNCILíS DIRECTIVE:
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN 292-2, EN 983, EN 792-7, EN 1454
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type examination on
behalf of Partner Industrial Products. The certificates are numbered: 01/169/007- Partner K30, 01/169/008 - Partner K40
Partille 1 October 2005
Ove Donnerdal, Development Manager
TECHNICAL DATA
dB(A)
WA
K30
2,0-2,4
7
3/4 / 19
3/4 / 19
SPZ
5100
8,7
Anti-freeze pneumatic tool oil
89
106
106
7,2
3,8
) in conformity with EC directive 2000/14/EC.
WA
K40
2,8-3,5
7
3/4 / 19
3/4 / NPT hona
SPZ
5400
9,9
Anti-freeze pneumatic tool oil
92
107
107
9,5
5,2
English
– 15