Safety Instructions; Steps Before Using A New Power Cutter; Personal Protective Equipment; Machine ' S Safety Equipment - Partner K30 Operator's Manual

Steps before using a new power
cutter.
• This machine is a pneumatically operated power cutter
intended for free-hand cutting. The machine must be
connected to a compressor that gives an air pressure of 7
bar and an air volume of 2.8-3.5 m
3
2.4 m /min for K30.
• Please read the operator's manual carefully.
• Check the cutting blades mounting, see the chapter
"Assembly".
• Check that the air hose is in full working order and in good
condition.
Let your Partner dealer check the power cutter and make
essential adjustments and repairs.
WARNING! Under no circumstances should
!
you modify the original design of the
machine without approval from the
manufacturer. Always use original spare
parts. Unauthorised modifications and/or
accessories may lead to serious injury or
death to the user or others.
WARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.

Personal protective equipment

WARNING! You must use approved personal
!
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask

SAFETY INSTRUCTIONS

3
/min for K40 and 2.0-
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement.
• Use leg-guards recommended for the material to be cut.
• Boots with steel toe-caps and non-slip sole
• Always have a first aid kit nearby.
Machine ' ' ' ' s safety equipment
This section describes the machine ' s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.
Switch
The switch is used to start and stop the machine.
– 5
English