Technical Data; Cutting Equipment; Ec-Declaration Of Conformity - Partner K2500 Operator's Manual

Technical data

Engine
Hydraulic oil flow, l/min / gpm
Working pressure, bar / psi
Max. working pressure, bar / psi
Max. speed of output shaft, rpm
Drive system, V-belt
Weight
Power cutter without cutting blade, kg
Noise levels
Noise pressure level at the operators ear, max speed,
measured according to ISO/DIS 15744, ISO/DIS 11201, dB (A)
Noise power level, max. speed, measured according to ISO/DIS
15744 and ISO/DIS 11201, dB (A)
Vibration levels
(see note 1)
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Handle vibrations are measured according to ISO 8662-4

Cutting equipment

Cutting blade Max. peripheral speed, m/s
16" 100

EC-declaration of conformity

(Applies to Europe only)
Partner Industrial Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the power
cutter Partner K2500 dating from 2004 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the
serial number), complies with the requirements of the COUNCILíS DIRECTIVE:
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
The following standards have been applied: EN 292-2
Let your Partner dealer check the power cutter and make essential adjustments and repairs.
The supplied power cutter conforms to the example that underwent EC type examination.
Partille January 23, 2004
Ove Donnerdal, Development Manager
TECHNICAL DATA
K2500
35-42 / 9-11
130-140 / 2000
150 / 2200
4300
SPZ
8,3
84,5
105
7,5
5,2
– 15
English