ADDITIONAL SAFETY RULES
1. Be aware that this is always in an operating condition, because
it
does not
have t o be plugged into an electrical outlet.
2. Check the wheel carefully for cracks or damage before operation. Replace
cracked or damaged wheel immediately.
3.
Use only flanges specified for this tool.
4. Be careful not to damage the spindle, flanges (especially the installing
surface) or bolt. Damage t o these parts could result in wheel breakage.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7.
Make sure the wheel is not contacting the workpiece before the switch is
8. Wait
until the wheel attains full speed before cutting.
9.
Stop operation immediately if you notice anything abnormal.
turned on.
IO.
Do not attempt t o lock the trigger in the
"ON"
position.
11. Never attempt to cut with the tool
held upside down in a vise. This
can lead to serious accidents,
because
it
is extremely dangerous.
12. Before setting the tool down after completing
a
cut, be sure that the wheel
has come t o a complete stop.
SAVE THESE INSTRUCTIONS.
6