Advertisement
Installing or removing the battery cartridge 1222
*Always switch off the tool before insertion or removal of the battery cartridge.
*To remove the battery cartridge, withdraw
it from the tool while pressing the buttons
on both sides of the cartridge.
*To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it until it is
locked with a little click.
*Do not use force when inserting the battery cartridge. If the cartridge does not slide in
easily, it is not being inserted correctly.
Installing the set plate
Always install the set plate when using bat-
tery cartridges 1200, 1201, 1201 A, 1202 or
1202A. Install the set plate on the tool with
the screw and nut provided as shown in
the figure.
.
/
Pan head screw
Set
plate
Installing or removing the battery cartridge 1200,1201,1201A, 1202 and 1202A.
*Always switch off the tool before insertion or removal of the battery cartridge.
*To
remove the battery cartridge, pull out
the set plate on the tool and grasp both
sides of the cartridge while withdrawing it
from the tool.
*To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it into place.
Snap the set plate back into place. Be sure
to close the set plate fulty before using the
tool.
*Do not use force when inserting the battery cartridge. If the cartridge does not slide in
easily, it is not being inserted correctly.
7
Advertisement
