Makita 4191DZ Instruction Manual page 10

installing water supply
Attach the tank holder on the tank. The tank
Attach the tank holder onto the motor hous-
ing. Tighten the screw
(B)
securely.
-Tank
Tank
holder
installing
portion
- ,
Connect the cap on the end of the polyvinyl
tube to the mouth of the tank. Turn the tank
clockwise when making the connection.
Then tighten the screw (A) securely to
secure the tank.
CAUTION:
If you find the polyvinyl tube is bent like a
"V"
or has been strained excessively after
installing the water supply, loosen the screw
(B)
and adjust the position of the tank to alle-
viate the bent, pinched or strained condition.
10