Table of Contents
Advertisement
MGA Video BIOS
A feature of the Matrox MGA Millennium card is the capability to flash
program the video BIOS. This is achieved as follows:
1 Set SW-1, on the Matrox card, to ON (BIOS unprotected).
2 Set the "Operating System" field in the Setup program to
3 Run the
updbios.bat
video BIOS flash program,
4 Set SW-1, on the Matrox card, to OFF (BIOS protected).
5 Set the "Operating System" field in the Setup program back to an appro-
priate setting.
Video cards without ROM (such as old CGA and monochrome) are not
supported by the BIOS. Memory holes above 1 MB are not supported. DDC
display detection is not a BIOS feature, but is handled by the video drivers.
Further Information About MGA
For more information on the Matrox MGA Millennium video adapter card,
contact Matrox Electronic Systems:
Matrox Electronic Systems Ltd.,
1055 St. Regis Blvd., Dorval, Quebec,
Canada H9P 2T4.
Telephone: (514) 685-2630; Fax: (514) 685-2853; BBS: (514) 685-6008
Matrox MGA Millennium Video Controller Card
command file (provided by HP), to execute the
, and the associated
progbios.exe
5 Video Controllers
.
Others
file.
*.bin
131
Advertisement
Table of Contents
