Addressing System Board Components (Bios Version: Gj.07.Xx); Dma Channel Controllers (Bios Version: Gj.07.Xx) - HP 525 5/XX Technical Reference Manual

Vectra 500 series pc
Table of Contents

Advertisement

4 Summary of the HP/Phoenix BIOS
HP/Phoenix BIOS (BIOS version: GJ.07.xx)
I/O Address Ports
03BC-03BF
03F0--03F5-03F7
03F8-03FF
03E8-03EF
0CF8-0CFF
0496-0497
0678-067A
0778-077A
1.
These addresses are dedicated to configuration registers for PCI devices.
Addressing System Board Components
(BIOS version: GJ.07.xx)
This section provides further details of how the BIOS uses the system board
components mentioned in the I/O port list.

DMA Channel Controllers (BIOS version: GJ.07.xx)

Only "I/O-to-memory" and "memory-to-I/O" transfers are allowed.
"I/O-to-I/O" and "memory-to-memory" transfers are disallowed by the
hardware configuration.
The system controller supports seven DMA channels, each with a page
register used to extend the addressing range of the channel to 16 MB.
106
Function
Parallel Port 1
Integrated Floppy Disk Controller
Serial Port 1
Serial Port 3
1
Used for PCI Configuration
HP Reserved
Parallel Port if ECP Mode is Selected
Parallel Port if ECP Mode is Selected
Bits

Advertisement

Table of Contents
loading

This manual is also suitable for:

520 5/xxVectra 520Vectra 525

Table of Contents