The level of iron discrimination you selected appears in the
TARGET readout, and R appears under your customized
selections as shown in the following diagram.
To adjust sensitivity in DISCRIMINATION mode
After you select your PRESET or customized targets, you can adjust the
detector's sensitivity. The default setting is 5 on the SENSITIVITY dial.
Press the LOW (-) or HIGH (+) touch pad on the control panel to
adjust the detector's sensitivity while monitoring your adjustment on
the SENSITIVITY dial.
The arrow on the SENSITIVITY dial in the LCD display points to the
selected setting.
To listen to tones in DISCRIMINATION mode
DISCRIMINATION mode includes the Audio Target Identification
(ATI) feature that identifies objects using three different tones or no
response at all, as shown in the following diagram.
NOTE:
Three-tone Audio Target Identification is disabled in the
ALL METAL mode.
17
NO
LOW
RESPONSE
TONE
Iron & Steel
Gold & Nickel
Example of Land Ranger™ set for
IR 4 iron discrimination with
customized selections for pull tab,
screw cap and zinc penny rejection.
MEDIUM
HIGH
TONE
TONE
Old & New
Copper, Silver &
Pull Tabs
Bronze