Table of Contents
Advertisement
Add an AirStation without changing your existing LAN configuration
1. Set the AirStation into Bridge/AP Mode by moving the switch on the bottom from
AUTO to BRI.
2. Connect one of the AirStation's LAN ports to an existing router or switch on your
network. Connect a PC to another LAN port for configuration. Nothing should be
plugged into the WAN port.
3. Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.1] (Specify an unused network address from the existing
LAN.)
Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.)
DHCP Server Function=[Disable]
4. The PC used for configuration will need to be restarted before continuing configuration.
Connecting to a Preexisting Network
Advertisement
Table of Contents
