Address Translation - Buffalo Tech AirStation WHR-HP-AG108 User Manual

NAT
You may disable Network Address
Translation and IPsec passthrough by
unchecking the appropriate Enable boxes.
If you have a DMZ, enter its IP address
in the IP Address of DMZ box. Incoming
packets containing no recognizable
destination port information will be
redirected to the DMZ's IP address.
IPv6 pass through can also be enabled
here. This feature should only be enabled
if instructed to do so by a network
administrator or your ISP.
Click Apply when done.
To set a NAT table entry manually, click
Edit NAT Table.