Step 1: Connect Your Equipment . Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem. . Connect the Ethernet cable from your cable or DSL modem to the WAN port on your AirStation.
Page 3
Power to outlet or power strip Cable or DSL Modem...
Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. We recommend that you use a wired computer that is plugged into the AirStation with an Ethernet cable for initial configuration. .
Step 3: Connecting Wireless Clients To connect wireless devices to the AirStation, you may either enter the SSID and encryption key manually, or you can use AOSS. For more information on AOSS, see pages 14 and 15. Consult your wireless clients’ manuals for instructions on configuring them manually.
Page 6
AOSS Alternative Step 3: Connect Wireless Clients with AOSS AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is simple.
Page 7
Congratulations! Your AirStation is installed and the basic setup has been configured. For ad- vanced settings and more detailed information, consult the User Manual, located on your AirNavi- gator CD-ROM. Technical Support: North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada).