Bridge/Ap Mode - Buffalo Tech AirStation WHR-HP-AG108 User Manual

Bridge/AP Mode might be desirable if you're adding wireless capability to an existing
network with a router. It is not suitable for most home configurations. If you plan to
use the AirStation as an normal wireless router, make sure that this switch is in the normal
(AUTO) position!
This AirStation supports quickly changing the
product from a wireless router to a conventional
access point.
Put your Airstation into Bridge/Access Point
Mode by moving the switch on the bottom
of your AirStation from AUTO to BRI. This
changes the default IP address of the AirStation
from 192.168.11.1 to 192.168.11.100, and
DHCP, NAT, and the WAN port are disabled.
1

Bridge/AP Mode