Speed Key (Macros); Access Door Control - First Alert FA1340C-UL User Manual

First alert security system user's manual

Hide thumbs Also See for FA1340C-UL:

Table of Contents

SPECIAL

SYSTEM

FUNCTIONS

Executing

Macros

Press and hold down (about 2 seconds) the "D" key until the following prompt appears:

Enter your user code. The defined speed key sequence

will begin automatically.

NOTE:

When defining speed key sequences, do not use the [#] key to represent Quick

Arming. The system uses the code entered at the prompt to initiate commands in a speed key

sequence, so quick an-n is unnecessary. The system interprets the use of the [#I] key in a speed

key sequence as its designated function only (usually installer functions).

Access

Door

Your system may be set up such that a locked access door (such as in a lobby) can be

Control

unlocked using a keypad command. Ask your installer if this has been done in your

system.

To activate

this relay;

1. Enter your security code and press m.

The door will unlock for 2 seconds.

- 30 -

Table of Contents

Fa1340c