Code Key) - First Alert FA120C User Manual

To Assign, Change,
or Delete
User Codes
4-DIGIT USER CODES
It is recommended that
obvious codes such as
1 1 1 1 or 1 2 3 4 not be
assigned.
Important:
Temporary users should not
be shown how to use any
system function they do not
need to know (e.g., bypassing
protection zones).
SECURITY CODES
1. Enter your Master code and press the CODE key.
2. Enter single-digit User Number (2Ð7) for which a code is to be
assigned, changed, or deleted.
3. If assigning or changing a user's code, enter the desired
4-digit code for use by that User Number. The keypad will beep once.
If deleting a user's code, perform steps 1 & 2 and stop. In a few
moments the keypad will beep once, indicating that the existing code
has been deleted.
To assign your Duress code, do the following:
Enter your [Master code] + [8] + [8] + [desired 4-digit code]. The keypad
will beep once.
The Master code can be changed by the main user of the system. To
change it, do the following:
Enter your [Master code] + [8] + [1] + [new Master code] + [new
Master code] again. The keypad will beep once.
{
A
THESE KEYS
NOT PRESENT
C
ON ALL
KEYPADS
OFF AWAY
2
1
MAXIMUM TEST
4 5
INSTANT CODE
8
7
READY
TYPICAL KEYPAD
0
*
Ð 1 1 Ð
B
D
STAY
USE THE CODE
3
KEY TO ASSIGN
BYPASS
OTHER USER
6
CODES
CHIME
9
"QUICK ARM" KEY
(IF PROGRAMMED
)
#