Table of Contents
Advertisement
USING SCHEDULES
After the windows for that day have been completed, the
system will prompt for disarm and arm time windows for the
next day. Repeat the procedure for all days of the week.
When all of the days have been completed, the system
will ask which days are to be activated.
This is the prompt that actually activates the temporary
schedule,
and allows the temporary
schedule to be
customized to a particular weeks needs. To select the
days which are to be activated, enter the desired number
l-7
(Monday = 1). An 'X" will appear under that day,
indicating the previously entered schedule for that day is
active. Entering a day's number again will deactivate that
day. Pressing 0 will turn all days on/off.
The temporary schedule will only be in effect for the days
which have the letter X underneath them. As the week
progresses, the days are reset to the deactive state.
When completed, press * to exit the temporary schedule
entry mode.
-
42
-
Advertisement
Table of Contents
