Table of Contents
Advertisement
1.
2.
3.
4.
5.
FUNCTIONS
OF THE KEYPADS
ALPHA
DISPLAY
WINDOW: A 2-line, 32-character
Liquid Crystal Display (LCD). Displays protection point
identification
and system status, messages, and user
instructions.
1 OFF/ KEY: Disarms the burglary portion of the system,
silences alarms and audible trouble indicators, and clears
visual alamr trouble after the problem has been corrected.
AWAY
KEY: Completely
arms both perimeter
and
interior burglary protection
for backup protection
by
sensing an intruder's
movements through
protected
interior areas as well as guarding protected
doors,
windows, etc. Late arrivals can enter through an entry
delay zone without causing an alarm if the system is
clii
before the entry delay time expires.
STAY
KM: Arms the perimeter burglary protection,
guarding protected doors, windows and other perimeter
protection points, and sounds an alarm if one is opened.
Interior protection is not armed, which allows movement
within your house without causing an alarm. Late arrivals
can enter through an entry delay zone without causing an
alam if the system is disarmed before the entry delay time
expires.
lMAXlMUMl
KEY: Arms in manner similar to AWAY
mode, but eliminates the entry delay period, thus providing
maximum protection. An alarm will occur immediately upon
opening any protection point, including entry delay zones.
6.
1-1
KEY: Tests the system and alarm sounder if
disarmed.
7.
( BYPASS]
KEY: Removes individual protection zones
from being monitored by the system. Displays previously
bypassed protection zones.
8.
-1
KEY: Arms in manner similar to STAY
mode, but turns off the entry delay period, offering greater
security while inside and not expecting any late arrivals.
An alarm will occur immediately upon opening any
perimeter protection point, including entry delay zones.
9.
1 CODE1 KEY: Allows the entry of additional user codes
that can be given to other users of the system.
10. -1
KEY: Turns on & off the CHIME mode. When
on, any entry through a protected delay or perimeter zone
while the system is disarmed will cause a tone to sound at
the Keypad(s).
11. F\
KEY: When depressed prior to arming the
system, the keypad will display all open protection zones
within the keypad's home partition. This key is also used to
display all zone descriptors that have been programmed for
your system, by holding the key down for at least 5
seconds.
12.
q
KEY: Permits ARMING of the system without use of a
security code ("Quick Am?', if programmed).
- 12 -
Advertisement
Table of Contents
