Introduction; Important Safety Instructions - Extron electronics MPA 401-70V User Manual

Introduction

This guide contains information about the Extron MPA 401-70V and MPA 401-100V mini
power amplifiers with instructions for experienced installers on how to install, configure,
and operate the equipment. Unless otherwise specified, references in this guide to the
"amplifier," "MPA," or "MPA 401" relate to the features or operation of either amplifier.
This section provides the following information:
•
•
•

Important Safety Instructions

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Important Safety Instructions
MPA 401-70V and MPA 401-100V Description
MPA 401-70V and MPA 401-100V Features
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the instructions of
the manufacturer.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for safety. If the provided plug does not fit into the outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments or accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as if the power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
MPA 401-70V and MPA 401-100V • Introduction 1