Adjusting The Steering Clutch Cable - Honda HP400 Owner's Manual

Adjusting the Steering Clutch Cable
Steering control will be impaired unless both steering clutch cables are
adjusted properly.
r
1. With the engine off, rock the power carrier forward and backward to find the
position at which each lever can be pulled closest to the handle grip.
*
2. With each steering clutch lever fully gripped, check whether the clearance
between the tip of the lever and the handle grip is 30-35 mm (1.18-l .38
in).
3. To adjust, loosen the lock nut with the lever gripped, and turn the adjusting
bolt to get the specified clearance.
4. After the adjustment, tighten the lock nut.
//
HANDLE GRIP
STEERING CLUTCH LEVER
ADJUSTING BOLT
45