Engine Oil Change - Honda HP400 Owner's Manual

Engine Oil Change
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Remove the engine oil fillercap and
loosen the oil drain bolt.
2. Set the oil funnel as shown, remove
the oil drain bolt and drain the oil
into a suitable container.
3. Once the oil has been drained,
tighten the oil drain bolt securely.
4. Fill the crankcase with the recom-
mended oil (see page 13) and check
the level.
5. After refilling, tighten the cap se-
curely.
Oil capacity: 0.60 JZ (0.63 US qt, 0.53
Imp qt)
ENGINE OIL
FILLER CAP
OIL
FUNNEL
UPPER LIMIT
Wash you hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local
recycling center or service station for reclamation. Do not throw it in the trash,
pour it on the ground, or down the drain.
Y
5
36