Adjusting The Steering Clutch Cable - Honda HP400 Owner's Manual

Adjusting the steering clutch cable
Steering control will be impaired unless both steering clutch cables are
adjusted properly.
1. With the engine off, rock the power carrier forward and backward to find the
position at which each lever can be pulled closest to the handle grip.
2. With each steering clutch lever fully gripped, check whether the clearance
between the tip of the lever and the handle grip is 30-35 mm (1.18-1.38
in).
3. .To adjust, loosen the lock nut with the lever gripped, and turn the adjust nut
to get the prescribed clearance.
4. After the adjustment, tighten the lock nut.
1
HANDLE GRIP
LOC-K NUT
\
STEERING CLUTCH LEVER
ADJUST BOLT
38