Table of Contents
Advertisement
Frequently Asked Questions
How far back can I rewind live TV? The length of time you can rewind live TV depends
on how long you have been tuned to a single channel. Each time you change channels, a
new copy is automatically stored to the built-in recorder. This copy saves up to the last 1
hour of programming. For example, if you have been watching the same channel for 15
minutes, you can rewind that 15 minutes of the program.
Can I record the quarter screen in the Program Guide or the DVR Recorded List?
Yes, you can record the quarter screen on all DVR screens by pressing Record
can also record the quarter screen in the Program Guide. Press Exit
video in full screen, and then press Record
Note: Pressing Record
program in the grid.
Can I record or pause the video in the PIP screen? Yes, but you must swap it to the
Main screen fi rst. After pressing Record
it back to the PIP screen and it will continue recording. You can also press PIP On/Off
, and the video will continue to record.
If I've been tuned to a program since it started, do I have to rewind to the
beginning to record the entire program? No, if you have been tuned to the program
since its beginning, just press Record
entire program. Recording will automatically stop when the program ends.
How will I know the DVR is almost out of recording space? When you try to schedule
the next recording, a warning appears on the Confi rm Recording screen. Also, you can
see what percentage of recording space you have used. Press List
for preferences.
B
Can you play back more than one recording? No, you cannot play back more than
one recording at a time.
What happens if my DVR loses power temporarily? Everything you have recorded is
saved, based on the save time you selected in the Confi rm Recording screen. Your scheduled
recordings during the time the DVR lost power are the only recordings you may miss.
Do my Parental Controls in the Program Guide carry over to DVR recordings? Yes.
If you block programs by channel or rating in the General Settings menu, those settings
are carried over to DVR recordings. For example, if you decide to block all R-rated
programs in the General Settings menu, the R-rated programs will still be recorded, but
you cannot play them back until you enter the correct PIN.
How do I block or erase individual recordings in my recorded list or change the save
time for the recording? Highlight the recording on the Recorded List screen, and press
Select
on the remote control. An Options screen appears for the program you selected.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affi liates in the U.S. and
other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2004, 2012 Cisco and/or its affi liates. All rights reserved.
July 2012
16
while in the Program Guide will record the highlighted
Cisco Systems, Inc.
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
.
and confi rming the recording, you can swap
from any point in the program to record the
. You
to display the
and then press
678 277-1120
800 722-2009
www.cisco.com
Part Number 740246 Rev F
Advertisement
Table of Contents
